Search This Blog

Showing posts with label bubinga. Show all posts
Showing posts with label bubinga. Show all posts

Wednesday, October 1, 2025

T-Square/Marking Gauge Add-On for a Small Ruler

Not all projects take a lot of time or a lot of wood.  A little scrap of Bubinga that was headed for the trash bin turned out to be the perfect material scrap for this project. 

Bubinga Scrap
Three CNC toolpaths.  Three vectors. Two router bits.  The slot that the ruler slides into was cut with a 1/8" t-slot bit.  The center area and curved edge were cut with the same 3/16" spiral down-cut end mill.  The blue friction tape keeps the ruler in place but still lets it slide out easy for compact storage. 
T-Square
This little block of wood turns a simple cheap ruler into a slightly more useful T-Square.  I plan to add this ruler/T-square to a drawing kit box project.  

A bonus feature is that the ruler can slide through.  This allows it to work as a marking gauge.

Marking Gauge
To insure that the ruler won't slide when using it I cut a recess under the friction tape for a small square nut, and added a thumb screw to lock the ruler in place.
Thumb Screw to lock it in place. 
 I'm delighted with how well it works and easy it was to make.  The bubinga scrap is delighted to be something useful.   ðŸ˜Š

4D

 

Saturday, July 23, 2022

Rocking Balans Chair

Mechanically Rocking Balans Chair
In the late 70s a new seating idea arrived.  As personal PCs started to show up in the early 80s a new set of ergonomic posture concepts also showed up.  

As part of my personal academic research I designed a progressive sequence of balans type chairs in search of a version that would fit better in an office environment.  The original rocking Balans chair had a dynamic quality to it. The rocker base allowed easy transition from perched forward to sitting level. It allowed fidgeting to keep from getting stiff while in the chair.  Many versions that followed copied the perch forward position but had no dynamic nature. 

Of all my prototypes this mechanically rocking version came closest to duplicating the qualities of that original rocking version. The X geometry allows the occupant to rock forward to the perch position or rock back to a level seat. The knee rests pivot to meet your shins at any angle. They pivot out of the way when rocked back and feet are flat on the floor.  

The Bubinga wood version above with blue seat and knee pads was my original prototype. The Maple wood version shown below was #1 of a series I made and sold to different campus offices that were just starting to use computers. 

Maple Production Version


Final Destinations Unknown
I don't know what happened to these chairs.  The owner of a local auction company told me he once had a group of some unusual chairs with orange seats to auction off, but he couldn't remember where they came from.  It wouldn't surprise me if the university sold them off as a group.  Modern office chairs with ergonomic adjustments have taken over. 

Questions and Comments welcome and encouraged. 

4D